KGS-0865

Industrial Managed 8-Port L2 Gigabit Ethernet Switch

KGS-0865

Industrial Managed 8-Port L2 Gigabit Ethernet Switch
360 Viewer

The switch provides eight 10/100/1000Mbps copper ports for connections to Ethernet, Fast Ethernet or Gigabit Ethernet devices. With the featured auto-negotiation function, the switch can detect and configure the connection speed and duplex automatically. The switch also provides auto-MDI/MDI-X function, which can detect the connected cable and switch the transmission wire pair and receiving pair automatically. This auto-crossover function can simplify the type of network cables used.
The switch is embedded with an Http server which provides management functions for advanced network functions including Port Control, Quality of Service, and Virtual LAN functions. The management can be performed via Web browser based interface over TCP/IP network.

Key Features:

  • Provides 8 10/100/1000Mbps copper ports
  • Auto-negotiation
  • Auto MDI/MDI-X crossover function
  • Supports IEEE 802.3x flow control for full duplex
  • Supports back pressure flow control for half duplex
  • Fully non-blocking Gigabit full wire speed switching performance
  • Jumbo frame support
  • Alarm relay output for power failure event and software configured port link fault events
  • 802.1Q VLAN function
  • Port mirroring function
  • IGMP snooping function
  • LLDP support
  • QoS (Quality of Service) function
  • Web management
  • SNMP MIB-II support and trap function
  • Wide operating temperature range
  • Supports IEEE 802.3az Energy Efficient Ethernet
  • Supports DIN-Rail mounting and panel mounting
  • Industrial-rated emission and immunity performance
Standard IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3az
Network Ports 8 10/100/1000Mbps copper ports
Copper Ports Shielded RJ-45, 10BASE-T, 100BASE-TX, 1000BASE-T compliant
Auto-negotiation, auto-MDI/MDI-X support
Network Cables Cat.5, 5e UTP or higher up to 100 meters
MAC Addresses 8K
Jumbo Frame Length Up to 9.6K bytes
Packet Buffer Size 4M bits
LED Indication Unit: Power, Alarm status
Per copper port: 1G/Link/Activity, 10-100/Link/Activity
DC Power Input Screwed terminal block: DC+/ DC- contacts with flange
Working voltage range: +8 ~ +57VDC
Polarity reversal protection
Relay Output Screwed terminal block: 2 “NO” dry contacts
Contact rating: 30VDC/1A or 120VAC/0.5A
Alarm events: power failure, software configured port link fault
Power Consumption 10W max.
Housing Enclosed metal with no fan
Environment Operating Temperature: -30°C ~ +70°C
Storage Temperature: -40°C ~ +85°C
Relative Humidity: 5% ~ 90% non-condensing
Dimension 42 x 106 x 140 mm (WxDxH)
Mounting Support DIN-Rail mounting, panel mounting (Optional)
Approval FCC Class A, VCCI Class A, CE mark Class A, IEC 60950-1 safety
EN 61000-6-4 emission, EN 61000-3-2, EN 61000-3-3,
EN 61000-6-2 Immunity for industrial environment,
IEC 60068-2-64 Vibration, IEC 60068-2-27 Shock 50G test
NEMA TS2 environment, EN 50121-4 Railway environment
MTBF 440K hours min.

Categories

Categories