KGS-0841-W

IP65/67 Fast Ethernet L2 switch

KGS-0841-W

IP65/67 Fast Ethernet L2 switch

KTI’s KGS-0841-W IP65/67 switch is an unmanaged Fast Ethernet switch with the ruggedized hardware design for protection against strong jets of water and temporary immersion in water.

Key Features:

  • Provide 8 10/100Mbps copper ports with M12 connector
  • Full wire speed forwarding and filtering
  • Supports 802.3x flow control for full-duplex and backpressure for half-duplex
  • Support jumbo frame up to 9.6K bytes
  • Flooding undesired packet storm caused by loops in the network or DOS attacks
  • Waterproof enclosure design, LAN port connectors and power connector
  • IP67 rated for protection against temporary immersion in water
  • IP65 rated for protection against strong jets of water
  • Support either direct DC input
Standard IEEE 802.3, 802.3x
Copper Ports Port: 10/100BASE-TX interface
Auto-negotiation, auto-MDI/MDI-X support
Connector: M12 D-coded (Std. IEC 61076-2-101 )
Network cable: Cat.5 up to 100m
MAC Addresses Table with 8K entries
Buffer Memory 176K bytes
Power Input Direct DC via power connector
Direct DC Input M23 connector (IP67 rated)
Working voltage range: +6.5 ~ 60VDC
LED Indication Unit: Power
Port: speed/link/activity status
Power Consumption 11.5W
Mechanical Aluminum molded housing with no fan
IP65/67 protection
Dimensions 163 x 60.5 x 195 mm (WxDxH)
Mounting Support Enclosure panel, flat mouting, wall mounting
Environment Operating Temperature: -40°C ~ 70°C
Storage Temperature: -40°C ~ 85°C
Relative Humidity: 5% ~ 95% RH
Approval FCC Class A, VCCI Class A, CE mark, CISPR 11 Class A
EN 61000-6-4 emission, EN 61000-3-2, 61000-3-3
EN 61000-6-2 immunity for industrial environment, IEC 60950-1 safety,
EN 50121-1, EN 50121-3-2, EN 50121-4 ,
IEC 60068-2-1 cold temperature test, IEC 60068-2-2 dry heat test,
IEC 60068-2-30 damp heat test,
IEC 60068-2-48 storage temperature test,
IEC 60529 IPX5: water jets test,
IEC 60529 IPX7: water immersion test,
IEC 60529 IP6X: ingress of dust test,
EN 61373 Vibration and Shock test
E-Mark E13 Certification,
EN50155 EMC & Environments,
NEMA TS2 Environment test