KCD-302

Industrial Tri-segment Media Converter

KCD-302

Industrial Tri-segment Media Converter
360 Viewer

The industrial KCD-302 converter series supports three switching-base segment communications with one 10/100 copper port and two 100M fiber ports.It can forward data traffic from copper to more than one fiber cables or between two fiber cables. This makes fiber cable deployment easier. It also can be used as a fiber cable extender to extend the cable length or convert data from multimode fiber to single mode fiber.

Key Features:

  • Supports DIN rail mounting and plane mounting
  • Provides 3 switching-base network segments – 1 x TP copper, 2 x Fiber
  • Supports full wire speed forwarding between any two of the three segments
  • Supports Back-pressure flow control for half-duplex operation
  • Provides comprehensive manual configuration settings
  • Transparent conversion to 802.1Q VLAN tagged packets
  • Screw terminal block and DC Jack power input interfaces
  • Supports wide power input voltage range : +7 ~ 30VDC
  • Supports wide operating temperature range : +70oC to -20oC
Forwarding 10BASE-T to 100BASE-FX, 100BASE-TX to 100BASE-FX
100BASE-FX to 100BASE-FX
100BASE-FX multimode to 100BASE-FX single mode
Forwarding Method Store-and-forward, Full wire speed switching
Packet Size Support 1536 bytes max.
Packet Types Transparent conversion with no modification to:
– Standard IEEE 802.3 Ethernet packet frames
– IEEE 802.1Q tagged packet frames
TP Port Shielded RJ-45 jack
Auto MDI/MDI-X crossover function
Auto-negotiation function for speed and duplex mode
Full-duplex and Half-duplex support
10Mbps – Supports Cat. 3,4,5 UTP cable up to 100m
100Mbps – Supports Cat. 5 UTP cable up to 100m
Fiber (FX) Port Multimode ST, SC, Single mode SC
100Mbps Full-duplex and Half-duplex support
MMF 50/125µm, 62.5/125µm fiber cable, SMF 9/125µm cable
Far End Fault Indication support
Flow Control IEEE 802.3x for Full-duplex, Back pressure for Half-duplex
LEDs Power status
TP port link, activity, speed, duplex status
Per FX port link, activity, optical link status
Configuration Setting Switches Auto/forced mode, TP speed, TP duplex FXduplex
DC Power Input Screwed terminator block: 2 pairs of +/- contacts
DC jack: -D 6.3mm/+D 2.0mm
Operating voltage range: +7 ~ +30VDC
Power Consumption 3W max. @+30V (DC IN)
Dimension 28 x 82 x 95 mm, Weight: 250g
Housing Enclosed metal with no fan
Mounting Support DIN-Rail mounting, Panel mounting
Environment Operating Temperature: (See ordering information)
Storage Temperature: -20°C ~ 85°C
Relative Humidity: 5% ~ 90% non-condensing
Approval FCC Class B, CE/EMC Class B, EN60950 safety

Categories

Categories