The KGS-1260 is a 12-port industrial managed Gigabit Ethernet switch series which is featured with the
following communication ports:
>> Eight 10/100/1000Mbps Gigabit copper ports
>> Four dual-speed SFP slots for 100Base-FX 1000Base-X
>> One RS-232 console port
Key Features:
- Eight 10/100/1000Mbps RJ-45 and four dual-speed SFP slots
- Four SFP slots support dual speed for 100BASE-FX and 1000BASE-X SFP transceivers
- All copper ports support auto-negotiation and auto-MDI/MDI-X detection
- Full wire speed forwarding for all 12 Gigabit switched ports
- Supports 802.3x flow control for full-duplex and backpressure for half-duplex
- Supports SFP with Digital Diagnostic Monitoring (DDM)
- Powered via typical industrial power voltage DC 12V-60V
- Provides Optical Power Alarm (OPA) function
- Provides Automatic Laser Shutdown (ALS) function
- Private MIB for DDM monitoring, Remote booting, and TFTP firmware update over SNMP
Management Features:
- Management:
HTTP/HTTPS/SSHv2/CLI telnet/CLI console/SNMP v1/v2c/v3/RMON
DHCP/DHCPv6 client, DNS client. NTPv4
IPv6 support, System Syslog, Configuration down/upload, Software upload
- Security:
NAS, 802.1X, MAC-based/Web/CLI authentication
IP MAC binding, TACACS+, IP source guard
- Layer 2:
QoS, 802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, Port Isolation
Storm control for UC/MC/BC packets
LACP port link aggregation
Static MAC configuration
IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping
Multiple Spanning Tree – MSTP. RSTP, STP
- KTI’s Auto Multi-Ring (KAMR) Technology:
Fast failover response time, Auto ring recovery when failure is repaired
Supports up to six redundant rings, Works with RSTP network
Supports ring member status monitoring for up to 100 units