KC-300DM Series

10/100BASE-TX TO 100BASE-FX MEDIA CONVERTERS

KC-300DM Series

10/100BASE-TX TO 100BASE-FX MEDIA CONVERTERS
360 Viewer

The 10/100BASE-TX to 100BASE-FX media converter series provides a media conversion allowing high-speed integration of fiber optic and twistedpair segments. With 10BASE-T and 100BASE-TX support, the converters provide seamless translation setween Ethernet and Fast Ethernet networks. A complete set of LEDs allows for quick status verification.

 

Key Features:

 

  • RoHS compliant
  • Connvert speed and media type
  • Supports full wire speed conversion
  • Supports 10/100M dual speed on TP connections
  • Each TP port supports auto-negotiation and auto-MDI/MDI-X detection
  • Link fault pass through function
  • Transparent to 802.1Q VLAN tagged packets
  • Far End Fault function on FX port
  • Supports desktop, wall, and center chassis mounting
  • Supports center chassis management
  • Low power consumption
  • Supports wide range of fiber options- ST, SC, MT-RJ, VF-45, single SC
    – Multi-mode fiber, Single mode duplex fiber, Single fiber
    – Short reach, medium reach, and long reach fiber connections
  • Provides user accessible settings for TP port configuration, disabling link fault pass through function
  • Provides optional user-inaccessible settings for specific system applications
  • Provides indications of remote media converter’s TP port status
  • Provides Loop Back Test function with connected remote media converter

 

 

TP Port IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Shielded RJ-45 jacks with Auto MDI/MDI-X detection
Auto-negotiation for speed and duplex auto detection
Forced mode with speed and duplex settings
Speed for 10Mbps or 100Mbps, Full-duplex or half-duplex support
FX Port IEEE 802.3u 100Base-FX compliant
Forced 100Mbps, Full duplex (factory default)
Far end fault Function
Cable Cat.5, 5e or higher UTP cable,
MMF – 62.5/125µm, 50/125µm, SMF – 9 /125µm
LEDs KC-300D: Power status
TP Ports: Link/Act, Speed, Duplex status
FX Ports: Link/Act status, Fiber signal detectedKC-300DM: Power status
TP Ports: Link/Act, Speed, Duplex status
FX Ports: Link/Act status, Fiber signal detected
Remote TP Ports: Link, Speed, Duplex status
Configuration Switches Accessible settings:
KC-300D – TP mode, TP duplex, TP speed, Link fault pass through
KC-300DM – TP mode, TP duplex, TP speed, Link fault pass through,
Auto status report
Packet Size Up to 1522 bytes for store-and-forward mode
No packet size limit for smart-forward mode (100-to-100)
Environment Operating Temperature: -5°C ~ 50°C (Main device)
Storage Temperature: -40°C ~ 85°C
Relative Humidity: 5% ~ 90% non-condensing
(* The operating temperature range of the bundled power adapter may differ from the temperature range of the main device.)
Weight KC-300D: 210g,
KC-300DM: 213g
Dimension 72.5 x 108 x 23 mm (WxDxH)
Power Input +5V ~ +12VDC (±5%) via external power adapter
Power Consumption 2W max. @+7.5V (DC IN)
Approval FCC class B, CE mark Class B

Categories

Categories