KPW-T4SP

Industrial High Power PoE++ Splitter & 60W/90W Isolated DC-DC Power Converters

KPW-T4SP

Industrial High Power PoE++ Splitter & 60W/90W Isolated DC-DC Power Converters
360 Viewer

KPW-T4SP is a high power PoE++ splitter which integrates Power over Ethernet
(PoE) technology to PoE incapable network device by just using a single twisted pair cable for both
power and data transaction. It is a high power splitter that is able to receive a power up to 128W in
voltage range of 36~57V over Ethernet twisted cable from IEEE 802.3af PoE, 802.3at PoE+ and
proprietary PoE++ PSE end over Ethernet twisted cable.

 

Key Features:

  • Enables PoE incapable network device with PoE capability
  • IEEE 802.3at PoE+ and 802.3af PoE compliance
  • Supports proprietary high power PoE++ up to 128W
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T
  • Supports Alternative A or Alternative B PoE input over Cat.5/6
  • Provides power class selection DIP for demanding power from PSE
  • Supports Type 1 PSE classification and Type 2 PSE 2-event classification
  • Provides solution with isolated and high-efficient DC-DC power converters
Standard IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T
PoE In Jack Shielded RJ-45
10BASE-T, 100BASE-TX, 1000BASE-T support
Power pins – Pin1/2/3/6 and Pin4/5/7/8 (support both)
LAN cable – Cat.5 or better
PoE Standard IEEE 802.3af Type 1, IEEE 802.3at Type 2
PoE Power Class Type 1 Class 0 ~ Class 3, Type 2 Class 4
Proprietary PoE++ Class 5~ Class 8 (DIP SW selectable)
PoE Input Voltage 36 ~ 57VDC
LAN Out Jack Shielded RJ-45
10BASE-T, 100BASE-TX, 1000BASE-T std.
LAN cable – Cat.5 or better
Power Output 2P Terminal block –DC+/DC
Power wires 12 ~ 22 AWG (1 meter max.)
LED Display PoE input status
DIP SW Power class selection for PSE classification
Housing Enclosed metal with no fan
Dimension 89.2 x 24 x 85 mm (LxWxH)
Mounting Support DIN-Rail, Panel mounting
Environment Operating temperature: -30°C ~ +70°C
Storage temperature: -30°C ~ +85°C
Relative Humidity: 5% ~ 95% non-condensing
Approval FCC Class A, CE Mark Class A, IEC60950-1 safety
IEC 60068-2-27 Shock, IEC 60068-2-64 Vibration

Categories

Categories