KGS-1064-HP

Industrial Managed 10-Port L2 Gigabit Ethernet PoE+ Switches with 2 dual-speed SFP Slots

KGS-1064-HP

Industrial Managed 10-Port L2 Gigabit Ethernet PoE+ Switches with 2 dual-speed SFP Slots
360 Viewer

The KGS-1064-HP is an 10-ports industrial managed Gigabit Ethernet switch which is featured with the following communication ports:
– Eight 10/100/1000Mbps Gigabit copper ports with PoE function
– Two dual-speed SFP slots for 100Base-FX 1000Base-X
– One RS-232 console port

 

Key Features:

  • Eight 10/100/1000Mbps RJ-45 and two dual-speed SFP slots
  • All copper ports support auto-negotiation and auto-MDI/MDI-X detection
  • All copper ports are equipped with 802.3at-compliant PoE PSE
  • Two SFP slots support dual speed for 100BASE-FX and 1000BASE-X SFP transceivers
  • Full wire speed forwarding
  • Supports 802.3x flow control for full-duplex and backpressure for half-duplex
  • Supports SFP with Digital Diagnostic Monitoring (DDM)
  • Provides PoE PSE redundancy function
  • Provides fiber optical power alarm function
  • Provides Automatic Laser Shutdown function
  • Powered via typical industrial power voltage DC 12V-30V
  • Web, telnet, SNMP managed
  • IPv6 support
  • SFP dual speed support
  • RSTP, STP, MSTP support
  • Multi redundant ring support
  • IGMP & MLD snooping
Standard IEEE 802.3, 802.3ab, 802.3z, 802.3x, 802.3at, 802.1x, 802.1w, 802.1D, 802.1Q
Network Ports 8 10/100/1000Mbps Gigabit copper ports
2 1G/100Mbps SFP slots
Copper Port Shielded RJ-45, 10/100/1000Mbps, auto-negotiation,
auto-MDI/MDI-X support
Mini-GBIC SFP SFP connector
Interface: 1000BASE-X and 100BASE-FX support
Console Connector: Shielded RJ-45
Interface: RS-232 with Galvanic isolation
Network Cables 10/100/1000Mbps copper: Cat.5 up to 100m
1000Base-X: 62.5/125µm, 50/125µm MM fiber, 9/125µm SM fiber
Power over Ethernet IEEE 802.3at compliant (High power PoE) PSE
PoE port output voltage 52V (±3%)
30W max. at port output for a Cat.5 distance of 100 meters
90W max. shared by all ports
MAC Addresses Table with 8K entries
Buffer Memory 4Mbits
LED Indication Per unit: Power, Management status
Per port: Speed, link/activity/PoE status
Per SFP: Speed/link/activity status
Relay Output Alarm: power failure, specific port link fault
Interface: 2 terminal contacts (30VDC/1A max. or 120VAC/0.5A max.)
DC Power Input Terminal block: +/- contacts
Operating voltage range: +12 ~ +30VDC
Power Consumption 14W max.@24V (Full load with no PoE support)
113W max.@24V (with PoE function)
Housing Enclosed metal with no fan
Dimension 60 x 106 x 140 mm (WxDxH)
Mounting Support DIN-Rail, Panel Mounting (Optional)
Environment Operating Temperature: -30ºC ~ 60ºC
Storage Temperature: -40ºC ~ 85ºC
Relative Humidity: 5% ~ 95% non-condensing
Approval FCC Class A, VCCI Class A, CE mark Class A, EN60950-1 safety
EN55022 emission, EN61000-3-2, EN61000-3-3, EN61000-6-2 Immunity for industrial environment, EN 50121-4 Railway environment IEC 60068-2-64 Vibration, IEC 60068-2-27 Shock 50G test

Categories

Categories