KGC-460

Industrial Managed Multi-function GbE Media Converter

KGC-460

Industrial Managed Multi-function GbE Media Converter

Description

The KGS-460 series is an industrial managed Gigabit Ethernet device which is featured with the following network ports:
– Two 10/100/1000Mbps Gigabit copper ports
– Two dual-speed SFP slots for 100Base-FX 1000Base-X

The device is featured the function modes:
– Dual media converts mode
– Dual media converters sharing redundant fiber uplink mode
– Fiber to fiber media converter mode
– 4-port switch mode

Key Features:

Provides 2 10/100/1Gbps copper ports and 2 dual-speed SFP fiber port slots
Supports 802.3x flow control for full-duplex and backpressure for half-duplex
All copper ports support auto-negotiation and auto-MDI/MDI-X detection
Dual-speed SFP slots support 100BASE-FX and 1000BASE-X SFP
SFP featured with Digital Diagnostic Monitoring (DDM) support
Multiple functions in one:
– Dual media converts mode
– Dual media converters sharing redundant fiber mode
– Fiber to fiber media converter mode
– 4-port switch mode
Link fault pass through (LFPT) featured for all media converter modes
Redundant ring function featured for 4-port switch mode
Supports Gigabit full wire speed bridging & forwarding performance
Jumbo frame support up to 9600 bytes
Alarm relay output for events of power failure and configured port link down
Green Ethernet power saving
802.3az Energy Efficient Ethernet (EEE) support

Specification

Standard	IEEE 802.3, 802.3ab, 802.3z, 802.3x, 802.3at, 802.1x, 802.1w, 802.1D, 802.1Q
Network Ports	2 10/100/1000Mbps Gigabit copper ports 2 1G/100Mbps SFP slots
Copper Port	Shielded RJ-45, 10/100/1000Mbps, auto-negotiation, auto-MDI/MDI-X
Mini-GBIC SFP	SFP connector, Interface: 1000BASE-X and 100BASE-FX support
Network Cables	10/100/1000Mbps copper: Cat.5, 5e UTP or higher up to 100m SFP fiber: 62.5/125µm, 50/125µm MM fiber, 9/125µm SM fiber
Power over Ethernet	IEEE 802.3at compliant (High power PoE) 30W max. at port output for Cat.5 distance of 100 meters
MAC Addresses	8K
LED Indication	Per unit: Power, Management status Per port: Speed, link/activity status Per SFP: Speed/link/activity status Per PoE port: PoE status
Relay Output	Alarm: power failure, configured port link fault Interface: 3 terminal contacts (30VDC/1A max. or 120VAC/0.5A max.)
DC Power Input	Screwed terminal block: DC +/- contacts Operating voltage range: +12 ~ +57VDC Voltage for PoE support: +45 ~ +57VDC Polarity reversal protection
Power Consumption	6W@56V max. (Full load with no PoE support) 66W@56V max. (Full load with 2 PoE+ max. output
Housing	Enclosed metal with no fan
Dimension	42 x 106 x 140 mm (WxDxH)
Mounting Support	DIN-Rail, Panel Mounting (Optional)
Environment	Operating Temperature: -40°C ~ 75°C Storage Temperature: -40°C ~ 85°C Relative Humidity: 5% ~ 95% non-condensing
Approval	FCC Class A, VCCI Class A, CE mark Class A, TUV EN 60950-1 safety EN 61000-6-4 emission, EN61000-3-2, EN61000-3-3, EN61000-6-2 Immunity for industrial environment, IEC 60068-2-64 Vibration, IEC 60068-2-27 shock