KGC-310M-C

Managed 10/100/1000Base-T to Dual-speed Fiber Media Converters

KGC-310M-C

Managed 10/100/1000Base-T to Dual-speed Fiber Media Converters
360 Viewer

The KGC-310M-C is Gigabit Ethernet media converter series which provide the following features:
Data Conversion between different Media types and Speed
The media converter supports the following conversions:
> 1000Mbps (1000BASE-T) copper to/from 1000Mbps (1000BASE-X) fiber
> 100Mbps (1000BASE-TX) copper to/from 1000Mbps (1000BASE-X) fiber
> 10Mbps (10BASE-T) copper to/from 1000Mbps (1000BASE-X) fiber
> 1000Mbps (1000BASE-T) copper to/from 100Mbps (100BASE-FX) fiber
> 100Mbps (1000BASE-TX) copper to/from 100Mbps (100BASE-FX) fiber
> 10Mbps (10BASE-T) copper to/from 100Mbps (100BASE-FX) fiber

 

Key Features:

  • Tri-speed 10/100/1000Mbps copper to dual-speed 1G/100Mbps fiber conversion
  • Comply with IEEE 802.3, 802.3u, 802.3ab, 802.3z standard
  • Support full wire speed conversion for Gigabit copper to Gigabit fiber
  • Support auto-negotiation with link partners
  • Provide dual-speed SFP on fiber port for mounting variety of fiber options
  • Provide loop back test function with link partner over fiber link
  • Provide monitoring function for remote link partner’s copper link status
  • Provide important LFPT (Link Fault Pass Through) media converter function
  • Support optional DIN-Rail installation
  • Support center chassis installation to achieve the advantages of central power, optional power
    redundancy and network management
  • Ideal solution for multimode, short reach up to long reach single mode fiber, Bi-Di applications
  • Web-based configuration management support
  • Support SNMP management
  • Port operating mode, flow control and status monitoring functions
  • Tagged or untagged packet filtering
  • 802.1Q VLAN tag stripping and tagging
  • Support Provider bridging (VLAN Q-in-Q) application with double tag capability
  • Support S-tag ethernet type tagging
  • Support Jumbo frame conversion
  • LLDP support
  • Energy efficient ethernet (EEE) support
Standard IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.1ad, 802.3az, 802.1Q
Copper Port Shielded RJ-45, 10/100/1000Mbps, Full/Half duplex
Auto-negotiation, Auto-MDI/MDI-X
Fiber Port SFP connector with pre-configured SFP fiber transceiver
1G/100Mbps Full duplex, Auto-negotiation
Far End Fault support
Network Cables Copper port: Cat.5e recommended or higher up to 100m
Fiber port: MMF 50/125µm, 62.5/125µm, SMF 9/125µm
DIP Switches Copper port operating mode
Flow control
Auto report for remote copper link status
LED Indication Power status
Local copper port status – link, speed, duplex
Local fiber port link status
Remote copper port status – link, speed, duplex
Loop back test status
Jumbo Frame size Support 9600 bytes max.
Loop Back Test Push button to start remote loop-back test with link partner over fiber link
Mounting Desktop, Wall, DIN-Rail (optional), Center chassis
Center Chassis Up to 16 units in one rack chassis with central power
Support optional power redundancy and management
Power Input +5 ~ +12VDC (+/-5%)
Consumption 3.5W max. @5V
Less than 3W when no link ports under power saving mode
Environment Operating Temperature: -40°C ~ 70°C (Main device)
0°C ~ 40°C (External power adapter)
Storage Temperature: -40°C ~ 85°C
Relative Humidity: 5% ~ 95% non-condensing
Dimension 72.5 x 108 x 23 mm (WxDxH)
Approval FCC Class A, CE mark Class A, VCCI Class A, C-Tick
  • Datasheet
  • (08/06/2021)
  • Firmware v1.028
  • (27/11/2018)

Categories

Categories