KGC-320

Managed 10/100/1000Base-T to Dual-speed Fiber Media Converter

KGC-320

Managed 10/100/1000Base-T to Dual-speed Fiber Media Converter
360 Viewer

The device is a 10/100/1000Base-T to Dual-speed
Fiber Media Converter

 

Key Features:

  • Tri-speed 10/100/1000Mbps copper to dual-speed 100/1000Mbps fiber conversion
  • Comply with IEEE 802.3, 802.3u, 802.3ab, 802.3z standard
  • Support full wire speed copper to fiber Gigabit conversion
  • Support Jumbo frame conversion
  • Support auto-negotiation with link partners
  • Provide one 100M and one 1000M SFP slots for mounting variety of fiber options
  • Provide loop back test function with link partner over fiber link
  • Provide monitoring function for remote link partner’s copper link status
  • Ideal solution for multimode, short reach up to long reach single mode fiber, Bi-Di applications
  • Web-based and SNMP configuration management support
  • Port operating mode, flow control and status monitoring functions
  • Tagged or untagged packet filtering
  • 802.1Q VLAN tag stripping and tagging
  • Provide IGMP snooping
  • Support Q-in-Q application with double tag capability
  • Support SNMP trap for port link change

 

Standard IEEE 802.3, 802.3u, 802.3ab, 802.3z
Copper Port Shielded RJ-45
10/100/1000Mbps, Full/Half duplex, Auto-negotiation, Auto-MDI/MDI-X
Fiber Port Two SFP connectors with pre-configured SFP fiber transceiver
100/1000Mbps Full duplex, Auto-negotiation, Far End Fault support
Network Cables Copper port: Cat.5e recommended or higher up to 100m
Fiber port: MMF 50/125µm, 62.5/125µm, SMF 9/125µm
DIP Switches Copper port operating mode, Flow control
Auto report for remote copper link status
LED Indication Power status,
Local copper port status – link, speed, duplex
Remote copper port status – link, speed, duplex
Loop back test status, Local fiber port status – link, speed
Jumbo Frame size Support 9600 bytes max.
Loop Back Test Push button to start loop back test with link partner over fiber link
PoE PSE IEEE 802.3at standard (Optional on copper port)
PSE pin 4/5 -Positive DC, Pin 7/8 -Negative DC
Power delivery 56V/30W max. at port output
2-Event classification support
DC Power Input Operating voltage range for PoE applications: +45 ~ +57VDC
Operating voltage range for Non-PoE applications: +6.5 ~ +60VDC
Power Consumption 3.7W@7.5V, 5.4W@56V (No PoE use)
Power Supply External type AC-DC power adapter
Rated input voltage 100~240 VAC
Rated input frequency 50/60Hz
Output voltage 56VDC (+1%/-3%)
Output current 1.16A max.
IEC320 AC power cord (attachable)
Mounting Desktop, wall, Din-Rail
Environment Operating Temperature: -10°C~ 50°C
Storage Temperature: -40°C ~ 85°C
Relative Humidity: 10% ~ 90% non-condensing
Dimension 144 x 104.5 x 26 mm (WxDxH)
Approval FCC Class A, CE mark Class A, C-Tick, IEC60950-1 safety

Categories

Categories