KGC-261-DP-BT/I

IEC 61850-3 IEEE 1613 Media Converter with PoE++ PSE support

KGC-261-DP-BT/I

IEC 61850-3 IEEE 1613 Media Converter with PoE++ PSE support
360 Viewer

Key Features:

  • IEC 61850-3 and IEEE 1613 industrial rated for power substation
  • Tri-speed 10/100M/1Gbps copper to dual-speed 100M/1Gbps fiber conversion
  • Comply with IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3af, 802.3at, 802.3bt standard
  • Support full wire speed conversion for Gigabit copper to Gigabit fiber
  • Provide dual-speed SFP on fiber port for mounting variety of fiber options
  • Provide important LFPT (Link Fault Pass Through) media converter function
  • Support Jumbo frame conversion
  • Energy Efficient Ethernet (EEE) support
  • Alarm events relay output
  • Optical Power Alarm (OPA) function
  • Auto Laser Shutdown (ALS) function
  • Fiber support for multimode, short reach up to long reach single mode fiber, Bi-Di applications
  • Web-based configuration management support
  • Support SNMP management
  • Provide variety of PoE options for different power level applications
  • PoE shutdown protection for incompliant PD, disconnection, over-current and short-circuit
Standard IEEE 802.3u, 802.3ab, 802.3z, 802.1ad, 802.3az, 802.1Q, 802.3af, 802.3at, 802.3bt
Copper Port Shielded RJ-45, 10/100/1000Mbps, Full/Half duple
Auto-negotiation, Auto-MDI/MDI-X
Fiber Port SFP connector with pre-configured SFP fiber transceiver
100Mbps/1Gbps Full duplex, Auto-negotiation
Far End Fault support
Network Cables Copper port: Cat.5e recommended or higher up to 100m
Fiber port: MMF 50/125µm, 62.5/125µm, SMF 9/125µm
LED Indication Unit: power status, PoE status
Per port: 1G/Link/Activity, 10-100/Link/Activity
Jumbo Frame size Up to 9.6K bytes
DC TB Input Flange terminal block: DC+/ DC-/ 3 Relay contacts
Rated voltage range: +12 ~ +57VDC
Relay Output 3 dry contacts for NC & NO pairs on DC TB
Contact rating: 30VDC/1A or 120VAC/0.5A
Alarm events: power failure, configured port link fault, OPA
DC Jack Input Power jack (Contacts: -D6.3mm, +D2.0mm)
Rated voltage range: +12 ~ +48VDC
DC DIN Input Power DIN, Mini-DIN-4 socket
Contact rating: 2.7A 48V
Rated voltage range: +12 ~ +48VDC
DC Power General: +12 ~ +57VDC
PoE: +45 ~ +57VDC
Polarity reversal protection
Power Consumption 5W max.@55V (Full load without PoE output)
102W max.@55V (Full load with PoE++ max. output)
Housing Enclosed metal with no fan
Environment Operating Temperature: -40°C ~ 75°C
Storage Temperature: -40°C ~ 85°C
Relative Humidity: 5% ~ 95% non-condensing
Dimension 40 x 106 x 140 mm (WxDxH)
Mounting Support DIN-Rail, Panel (optional)
MTBF 250K hours min.

Categories

Categories